주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 10개에 영향을 미칩니다.

영어
네덜란드어

1 단계 번역 중

1 단계
Insert the tip of an opening pick between the back cover and the mid frame and slide it around the phone, to cut the adhesive. Using a suction handle to lift the back cover may help to get an initial gap for the opening pick to put in. If the adhesive is hard to cut, use an iOpener to loosen it.
  • Insert the tip of an opening pick between the back cover and the mid frame and slide it around the phone, to cut the adhesive.

  • Using a suction handle to lift the back cover may help to get an initial gap for the opening pick to put in.

  • If the adhesive is hard to cut, use an iOpener to loosen it.

Steek de punt van je openingsplectrum tussen de achterste behuizing en het midframe en schuif deze rondom de buitenkant van de telefoon om de lijm door te snijden.

Gebruik een zuignap om de achterste behuizing omhoog te trekken en zo een opening te creëren waar je openingsplectrum in past.

Als de lijm te hard is om door te snijden, kun je een iOpener gebruiken om deze te verzwakken.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.