알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 22개에 영향을 미칩니다.
10 단계 번역 중
10 단계
Removing the battery connector bracket screws
-
Remove the following two screws securing the metal battery connector bracket to the logic board:
-
One 1.8 mm Phillips screw
-
One 1.6 mm Phillips screw
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.