주요 콘텐츠로 건너뛰기

iPhone 5 Display tauschen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 22개에 영향을 미칩니다.

7 단계
iPhone 5 Screen Replacement, Start lifting the front panel assembly: 0 단계, 이미지 1개 중 1개
Start lifting the front panel assembly
  • Make sure the suction cup is firmly attached to the front panel assembly.

  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.

  • Take your time and apply firm, constant force. The screen is a much tighter fit than most devices.

  • With a plastic opening tool, begin to gently pry the rear case down, away from the screen, while you pull up with the suction cup.

  • There are several clips attaching the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly.

Vergewissere dich, dass der Saugnapf fest auf der Displayeinheit aufsitzt.

Während du das iPhone mit einer Hand unten hältst, ziehe an dem Saugnapf, um die Displayeinheit etwas von dem hinteren Gehäuse zu entfernen.

Nimm dir Zeit und übe einen konstant kräftigen Zug aus. Der Bildschirm ist um einiges fester eingepasst, als bei den meisten Geräten.

Heble mithilfe eines Plastik Opening Tools die Kanten des hinteren Gehäuses vorsichtig nach unten, weg vom Bildschirm, während du mit dem Saugnapf nach oben ziehst.

Die Displayeinheit ist mit einigen Clips am hinteren Gehäuse angebracht, deshalb wirst du möglicherweise sowohl Saugnapf als auch Plastik Opening Tool gebrauchen müssen, um die Displayeinheit zu lösen.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.