물건을 수리하세요 커뮤니티 상점

iPhone 5 Vervanging van het scherm

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 22개에 영향을 미칩니다.

안내서로 돌아가기
영어
네덜란드어
15 단계
iPhone 5 Screen Replacement, Disconnecting the front panel assembly cables: 0 단계, 이미지 3개 중 1개 iPhone 5 Screen Replacement, Disconnecting the front panel assembly cables: 0 단계, 이미지 3개 중 2개 iPhone 5 Screen Replacement, Disconnecting the front panel assembly cables: 0 단계, 이미지 3개 중 3개
Disconnecting the front panel assembly cables

  • Make sure the battery is disconnected before you disconnect or reconnect the cables in this step.

  • Use a plastic opening tool or a fingernail to disconnect the three front panel assembly cables:

  • Front-facing camera and sensor cable

  • LCD cable

  • Digitizer cable

  • When reassembling your phone, the LCD cable may pop off the connector. This can cause white lines, or nothing at all to appear when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to disconnect and reconnect the battery.

Het loskoppelen van de schermkabels

Zorg dat de batterij losgekoppeld is voordat je de kabels in deze stap loskoppelt of weer aansluit.

Gebruik een plasticen openingstool of je nagel om de volgende drie schermkabels los te koppelen:

De naar voren gerichte camera- en sensorkabel

LCD-kabel

Digitizerkabel

Tijdens het in elkaar zetten kan het gebeuren dat de LCD-kabel van de verbinding loskomt. Dit kan zorgen voor witte lijnen in je scherm of een compleet zwart scherm. Maak in dat geval de kabel opnieuw vast en haal de spanning even van de telefoon. Dat kan het beste door de batterij even los en weer vast te maken.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.