주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 안내서에 영향을 미칩니다.

영어
네덜란드어
6 단계
Do not lift the motherboard all the way out in this step; the daughterboard ribbon cable on the underside needs to be disconnected first. Grip the edges of the motherboard and lift up slightly. Use the point of a spudger to move the battery and sensor assembly ribbon cables away from the edges of the motherboard.
  • Do not lift the motherboard all the way out in this step; the daughterboard ribbon cable on the underside needs to be disconnected first.

  • Grip the edges of the motherboard and lift up slightly.

  • Use the point of a spudger to move the battery and sensor assembly ribbon cables away from the edges of the motherboard.

  • With the battery and sensor assembly cables out of the way, hinge the motherboard up and away from the display, taking care not to put too much stress on the daughterboard ribbon cable.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.