주요 콘텐츠로 건너뛰기

여는 절차

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 73 안내서에 영향을 미칩니다.

17 단계
Opening Procedure, Separate the right adhesive: 0 단계, 이미지 3개 중 1개 Opening Procedure, Separate the right adhesive: 0 단계, 이미지 3개 중 2개 Opening Procedure, Separate the right adhesive: 0 단계, 이미지 3개 중 3개
Separate the right adhesive
  • Insert a new opening pick and slide it to the middle of the iPad's right edge.

  • The display cables are located approximately halfway from the bottom of the iPad. Stop sliding once you reach three inches from the bottom of the iPad.

새 여는 픽을 끼우고 iPad의 오른쪽 가장자리 가운데로 밀어 넣으세요.

디스플레이 케이블은 iPad 하단에서 약 절반 정도에 위치하고 있습니다. iPad 하단에서 3인치에 도달하면 밀기를 멈추세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.