주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 153개에 영향을 미칩니다.

영어
스페인어
8 단계
While the bottom edge is being heated by the iOpener, begin releasing the adhesive from the right edge of the iPad. Slide the opening pick down along the edge of the iPad, releasing the adhesive as you go. The adhesive is very strong, and some serious force may be required. Work carefully.
  • While the bottom edge is being heated by the iOpener, begin releasing the adhesive from the right edge of the iPad.

  • Slide the opening pick down along the edge of the iPad, releasing the adhesive as you go.

  • The adhesive is very strong, and some serious force may be required. Work carefully.

  • If you can see the tip of the opening pick underneath the front glass, pull the pick out just a little bit. While using the opening pick this deep won't damage anything, it may get adhesive residue all over the LCD.

Mientras que el borde inferior está siendo calentado por el iOpener, comience a soltar el adhesivo desde el borde derecho del iPad.

Deslice la selección de apertura a lo largo del borde del iPad, liberando el adhesivo a medida que avanza.

El adhesivo es muy fuerte, y puede ser necesaria alguna fuerza seria. Trabaje con cuidado.

Si puede ver la punta de la selección de apertura por debajo del cristal frontal, tire de la selección un poco. Mientras que usa la abertura escoge esto profundo no dañará cualquier cosa, él puede conseguir residuos adhesivos por todas partes el LCD.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.