메인 콘텐츠로 스킵하기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 153 안내서에 영향을 미칩니다.

영어
스페인어

16 단계 번역 중

16 단계
Continue releasing the adhesive all the way along the bottom edge of the iPad. On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
  • Continue releasing the adhesive all the way along the bottom edge of the iPad.

  • On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.

  • Leave the opening pick wedged underneath the front glass near the home button.

Continúe soltando el adhesivo todo el camino a lo largo del borde inferior del iPad.

En los modelos de iPad 4, inserte la selección a una profundidad máxima de 1/2 pulgada en esta área, para evitar dañar el cable de cinta del botón de inicio.

Deje la selección de abertura apretada debajo del cristal frontal cerca del botón de inicio.

[* black] Continue releasing the adhesive all the way along the bottom edge of the iPad.
[* icon_caution] On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
[* icon_caution] On iPad 4 models, insert the pick to a maximum depth of 1/2 inch (10 mm) in this area, to avoid damaging the home button ribbon cable.
[* black] Leave the opening pick wedged underneath the front glass near the home button.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.