주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

영어
프랑스어
2 단계
Line up the small SATA connector so that the short side on the SSD connector matches the short side on the enclosure connector. Slide the drive in through the front of the enclosure until the SATA connector is fully seated. The SSD connects with the enclosure in only one way. If the connectors are not lining up, rotate the SSD and try again.
  • Line up the small SATA connector so that the short side on the SSD connector matches the short side on the enclosure connector.

  • Slide the drive in through the front of the enclosure until the SATA connector is fully seated.

  • The SSD connects with the enclosure in only one way. If the connectors are not lining up, rotate the SSD and try again.

Alignez le petit connecteur SATA de telle sorte que le côté court du connecteur du SSD corresponde au connecteur court du boîtier.

Faîtes glisser le disque dans le boîtier jusqu'à ce que le connecteur SATA soit entièrement connecté.

Le SSD se connecte avec le boîtier dans une seule direction. Si les connecteurs ne s'alignent pas, retournez le SSD et réessayez.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.