기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

안내서로 돌아가기
영어
프랑스어
5 단계
Peel the backing off of the adhesive back of the small temperature sensor board. Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector. Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.

  • Peel the backing off of the adhesive back of the small temperature sensor board.

  • Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector.

  • Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.

Enlevez la protection de l'adhésif de la petite carte du capteur de température.

Collez la carte du capteur de température sur une zone métallique visible, aussi proche que possible du connecteur SATA.

Repliez les câbles du capteur de façon qu'ils ne vous gênent pas lors de l'installation du boîtier.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.