주요 콘텐츠로 건너뛰기
8 단계
Pop goes the digitizer! With just light adhesive around the edge, it's nice to have a part that finally comes off easily. We've got a full house in our hand with the bezel, logic board and battery assembly, and the rear case.
  • Pop goes the digitizer!

  • With just light adhesive around the edge, it's nice to have a part that finally comes off easily.

  • We've got a full house in our hand with the bezel, logic board and battery assembly, and the rear case.

  • We hope that the minds at Apple aren't as twisted as their cables. Cables with this much form probably come out of engineering efforts to make this iPod as thin as possible.

数字转换器,砰!

多亏了边缘处的少量的粘合剂,最后一个组成部件很容易就能被拆下。

一手的刃角、逻辑板、电池和后盖。

我们希望 Apple 的心思不像它们的线缆一样复杂。但是有可能如此扭曲的线缆是 Apple 工程师为了缩减内部空间而设计的。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.