주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

4 단계
Slide the pick down the bottom edge of the phone. Go slowly so that the tip doesn't slip out of the seam. If sliding becomes difficult, reheat and reapply the iOpener. Leave the pick in place to prevent the adhesive from resealing, and grab another pick as you proceed to the next step.
  • Slide the pick down the bottom edge of the phone.

  • Go slowly so that the tip doesn't slip out of the seam. If sliding becomes difficult, reheat and reapply the iOpener.

  • Leave the pick in place to prevent the adhesive from resealing, and grab another pick as you proceed to the next step.

デバイス下側端を開口ピックでスライドします。

先端が継ぎ目から滑り出ないように、ゆっくりと慎重にスライドします。スライドが難しい場合は、再度iOpenerで温めてください。

接着剤が再装着するのを防ぐため、ピックはその位置に残しておきます。次の手順に進む前に、もう一枚、開口ピックを準備してください。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.