메인 콘텐츠로 스킵하기
영어
프랑스어
3 단계
Disconnect the battery from the board, and Reheat the location to losen adhesive.
Lift The Battery
  • Disconnect the battery from the board, and Reheat the location to losen adhesive.

  • Try not to directly heat the battery. if you heat a bad battery, the Lithium may expand and cause damage to the board or self.

  • Gently lift the battery from the housing. The adhesive is tough, and may require some force. dont puncture the battery while doing this.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.