작업중인 해당 device의 특정 부분 또는 부품을 설명하여 주십시오. 예: 배터리
제목을 작성하세요.
독자가 안내서를 파고들기 전에 배경 정보를 전달하세요.
1 단계 — Presentation: the different faces of the case
Here are the different interesting faces of the case: front (bay disks), rear (connectors and fan).
2 단계 — Teardown : remove disk media
nothing very hard … remove the disk media by pressing "push" buton.
3 단계 — Backplane and memory slot access
2 x SATA port
4 단계 — Case: removing the cover 1/2
Remove the screw on the back of the case next to Kensington incision.
5 단계 — Housing: cover removal 2/2
Once rear screws removed …
6 단계 — Teardown: internal parts
in orange: internal SATA ports
7 단계 — Teardown: spacer holding cage and case
simply unscrew the screw to remove the spacer.
8 단계 — Disassembly: spacer holding fan
same as before ... unscrew the screw to remove the plastic spacer
9 단계 — Teardown: removal of the fan
the fan has been removed for the tutorial. This is not mandatory ... but better to have a little more room!
10 단계 — Teardown: removal of the motherboard 1/2
to remove the motherboard from the box, unscrew the 4 screws as below ...
11 단계 — Teardown: removal of the motherboard 2/2
once the screws are removed, pull the front slightly outwards ...
12 단계 — Teardown: removal of the disk bay
remove the screws marked in yellow (x4)
13 단계 — Internal parts: case, motherboard
1 - motherboard (processor side)
14 단계 — Many thanks!
photograph showing one of the phases of the NAS teardown.
귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.