주요 콘텐츠로 건너뛰기

Nintendo Switch Rückabdeckung austauschen

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 22개에 영향을 미칩니다.

1 단계 번역중

1 단계
Nintendo Switch Rear Panel Replacement, Release the Joy Con controller locking tabs: 0 단계, 이미지 3개 중 1개 Nintendo Switch Rear Panel Replacement, Release the Joy Con controller locking tabs: 0 단계, 이미지 3개 중 2개 Nintendo Switch Rear Panel Replacement, Release the Joy Con controller locking tabs: 0 단계, 이미지 3개 중 3개
Release the Joy Con controller locking tabs
  • Before you begin this repair, make sure the device is completely powered off.

  • Press and hold down the small round button on the back of the Joy Con controller.

  • While you hold down the button, slide the controller upward.

Schalte das Gerät komplett aus, bevor du mit der Reparatur beginnst.

Drücke und halte den kleinen runden Knopf auf der Rückseite des Joy Con Controllers.

Halte den Knopf weiterhin gedrückt und schiebe den Controller nach oben.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.