주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 7개에 영향을 미칩니다.

2 단계
Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.
Apply heat
  • Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.

  • Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.

  • You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.

准备iOpener (当然,你也可以使用吹风机或者热风枪),并加热到它已经对你而言足够烫手。

把iOpener放在手表上至少一分钟,确保将屏幕完全加热,这样才能软化粘在表壳上的粘胶。

您可能需要重新加热iOpener,或者在屏幕部分冷却时移动iOpener,以将屏幕加热到足以撬开它的程度。

-[* black] [guide|11677|Prepare an iOpener|new_window=true], and heat the display to soften the adhesive securing it in place.
+[title] Apply heat
+[* black] [guide|11677|Prepare an iOpener] (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.
+[* black] Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.
+[* icon_note] You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.