주요 콘텐츠로 건너뛰기

Reemplazo del joystick derecho del Nintendo Switch

영어
스페인어
2 단계
Right Joy-Con Joystick Replacement, Open the case: 0 단계, 이미지 3개 중 1개 Right Joy-Con Joystick Replacement, Open the case: 0 단계, 이미지 3개 중 2개 Right Joy-Con Joystick Replacement, Open the case: 0 단계, 이미지 3개 중 3개
Open the case
  • Insert an opening pick under the lower side of the back panel (opposite the R and ZR buttons).

  • Slide the flat edge of an opening pick up the side of the Joy-Con.

  • Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel has shallow interference-fit tabs on the side opposite the charging rail. These loosen fairly easily, so not much pressure is needed.

Inserta una púa de apertura en la costura del borde inferior del controlador (opuesto a los botones R y ZR).

Desliza lentamente el borde plano de tu púa de apertura por el lateral del Joy-Con.

Ten cuidado de no deslizar la púa de la apertura demasiado dentro del Joy-Con. Esto puede dañar los componentes internos. El panel trasero se suelta con bastante facilidad, por lo que no se necesita mucha presión.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.