주요 콘텐츠로 건너뛰기

오른편 Joy-Con Joystick 교체

2 단계
Right Joy-Con Joystick Replacement, Open the case: 0 단계, 이미지 3개 중 1개 Right Joy-Con Joystick Replacement, Open the case: 0 단계, 이미지 3개 중 2개 Right Joy-Con Joystick Replacement, Open the case: 0 단계, 이미지 3개 중 3개
Open the case
  • Insert an opening pick under the lower side of the back panel (opposite the R and ZR buttons).

  • Slide the flat edge of an opening pick up the side of the Joy-Con.

  • Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel has shallow interference-fit tabs on the side opposite the charging rail. These loosen fairly easily, so not much pressure is needed.

후면 패널 하단 가장자리 밑에 여는 픽을 끼우세요 (R 그리고 ZL 버튼 반대편).

여는 픽의 평평한 모서리를 Joy-Con 측면에서 밀어 올리세요.

여는 픽을 Joy-Con 내부에 너무 깊숙이 밀어 넣지 않도록 주의하세요. 내부 부품을 손상할 수 있습니다. 후면 패널에는 충전 레일 반대편에 얕은 interference-fit 탭들이 있습니다. 이들은 상당히 쉽게 풀어지므로 많은 힘은 필요하지 않습니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.