更换右侧Joy-Con摇杆

영어

중국어

2 단계 번역중

2 단계

Open the case

Insert an opening pick under the lower side of the back panel (opposite the R and ZR buttons).
Slide the flat edge of an opening pick up the side of the Joy-Con.
Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel has shallow interference-fit tabs on the side opposite the charging rail. These loosen fairly easily, so not much pressure is needed.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.