물건을 수리하세요 커뮤니티 상점

오른편 Joy-Con Joystick 교체

안내서로 돌아가기
영어
한국어
10 단계
Right Joy-Con Joystick Replacement, Disconnect the midframe: 0 단계, 이미지 3개 중 1개 Right Joy-Con Joystick Replacement, Disconnect the midframe: 0 단계, 이미지 3개 중 2개 Right Joy-Con Joystick Replacement, Disconnect the midframe: 0 단계, 이미지 3개 중 3개
Disconnect the midframe

  • The ZR button cable is locked in place by a small ZIF connector on the motherboard. Use tweezers or a spudger to flip up the ZIF connector lock.

  • Use tweezers to gently pull the ZR button flex cable out of the ZIF connector socket. The midframe is now disconnected and can be removed.

  • The ZR button cable in this Joy-Con is short and can be tricky to reconnect. If you are worried about not being able to reconnect it, you can skip this step and leave it connected, which we recommend.

  • If you choose to leave the cable connected, be careful. Work slowly and do your best to keep the midframe from moving around as you perform the last few steps to avoid damaging the cable.

중앙프레임 분리하기

ZR 버튼 케이블은 마더보드의 작은 ZIF 커넥터가 고정하고 있습니다. 핀셋이나 spudger/스퍼저를 사용하여 ZIF 커넥터 잠금 장치를 뒤집어 주세요.

핀셋을 사용하여 ZIF 커넥터 소켓에서 ZR 버튼 플렉스 케이블을 살살 잡아당기세요. 중앙프레임은 이제 빼서 분리할 수 있습니다.

이 Joy-Con ZR 버튼 케이블은 짧고 다시 연결하기가 까다로울 수 있습니다. 버튼 케이블을 다시 연결할 수 없다는 걱정이 된다면, 이 단계를 건너뛰고 연결 상태를 유지할 것을 권장합니다.

케이블 연결 상태를 유지하려면, 주의를 요합니다. 케이블 손상을 방지하기 위해 마지막 몇 단계를 수행할 때 천천히 작업하고 중앙프레임이 움직이지 않도록 최선을 다하세요.

[title] Disconnect the midframe
-[* black] The ZR button cable is locked in place by a small [guide|25629|ZIF connector|stepid=64969|new_window=true] on the motherboard. Use tweezers or a spudger to flip up the ZIF connector lock.
+[* black] The ZR button cable is locked in place by a small [guide|25629|ZIF connector|stepid=64969|new_window=true] on the motherboard. Use [product|IF145-020|tweezers] or a spudger to flip up the ZIF connector lock.
[* black] Use tweezers to gently pull the ZR button flex cable out of the ZIF connector socket. The midframe is now disconnected and can be removed.
[* icon_note] The ZR button cable in this Joy-Con is short and can be tricky to reconnect. ***If you are worried about not being able to reconnect it, you can skip this step and leave it connected, which we recommend.***
[* black] If you choose to leave the cable connected, ***be careful.*** Work slowly and do your best to keep the midframe from moving around as you perform the last few steps to avoid damaging the cable.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.