물건을 수리하세요 커뮤니티 상점

更换右侧Joy-Con摇杆

안내서로 돌아가기
영어
중국어
10 단계
Right Joy-Con Joystick Replacement, Disconnect the midframe: 0 단계, 이미지 3개 중 1개 Right Joy-Con Joystick Replacement, Disconnect the midframe: 0 단계, 이미지 3개 중 2개 Right Joy-Con Joystick Replacement, Disconnect the midframe: 0 단계, 이미지 3개 중 3개
Disconnect the midframe

  • The ZR button cable is locked in place by a small ZIF connector on the motherboard. Use tweezers or a spudger to flip up the ZIF connector lock.

  • Use tweezers to gently pull the ZR button flex cable out of the ZIF connector socket. The midframe is now disconnected and can be removed.

  • The ZR button cable in this Joy-Con is short and can be tricky to reconnect. If you are worried about not being able to reconnect it, you can skip this step and leave it connected, which we recommend.

  • If you choose to leave the cable connected, be careful. Work slowly and do your best to keep the midframe from moving around as you perform the last few steps to avoid damaging the cable.

断开中框的连接

ZR键的排线被ZIF连接器固定在主板上。用镊子翻开ZIF连接器的锁止机构。

使用镊子轻轻地将 ZR 按钮的柔性电缆从 ZIF 连接器插座中拉出。 中框现在已断开连接，可以移除。

这款 Joy-Con 中的 ZR 按钮电缆很短，重新连接可能很棘手。 如果你担心无法把它重新连上，我们建议你可以跳过此步骤并保持电缆的连接。

如果你选择保持电缆连接，请务必小心。 在执行最后几个步骤时，请操作的慢一点，并尽力防止中框移动，以免损坏电缆。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.