주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

2 단계
The antenna cable is soldered to the board. It can be unsoldered or just cut. Use the pliers to make the underside of the antenna smaller so it can fit through the case hole, and at the same time, pull the antenna itself.
remove the antenna
  • The antenna cable is soldered to the board. It can be unsoldered or just cut.

  • Use the pliers to make the underside of the antenna smaller so it can fit through the case hole, and at the same time, pull the antenna itself.

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.