주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 7개에 영향을 미칩니다.

3 단계
Hold onto your iPhone securely and close the handle of the iSclack to slightly separate the screen from the rear case of the phone. Don't try to completely separate the screen; a small opening along the bottom edge is all you need. Insert an opening pick into the gap under the display on the lower edge of the iPhone.
  • Hold onto your iPhone securely and close the handle of the iSclack to slightly separate the screen from the rear case of the phone.

  • Don't try to completely separate the screen; a small opening along the bottom edge is all you need.

  • Insert an opening pick into the gap under the display on the lower edge of the iPhone.

  • Skip the next two steps.

Halte dein iPhone gut fest und drücke den Griff des iSclack zusammen, um das Display ein wenig vom Rückgehäuse zu lösen.

Versuche nicht, das Display völlig abzulösen, eine kleine Öffnung an der Unterkante ist ausreichend.

Setze ein Plektrum in den Spalt unter dem Display an der Unterkante des iPhones ein.

Überspringe die nächsten beiden Schritte.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.