주요 콘텐츠로 건너뛰기

iPhone XR Display Assembly 디스플레이 어셈블리 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 9 안내서에 영향을 미칩니다.

6 단계
iPhone XR Display Assembly Replacement, Unscrew the logic board connector cover: 0 단계, 이미지 2개 중 1개 iPhone XR Display Assembly Replacement, Unscrew the logic board connector cover: 0 단계, 이미지 2개 중 2개
Unscrew the logic board connector cover
  • Remove the five screws securing the logic board connector bracket to the rear case:

  • One 1.3 mm Phillips #000 screw

  • One 1.5 mm Phillips #000 screw

  • Three 1.2 mm Y000 screws

  • Remove the bracket.

  • Be careful not to lose the smaller bracket clipped onto the edge. It's secured with a small clip and is easy to accidentally knock off of the larger bracket.

로직 보드 커넥터 브래킷을 후면 케이스에 고정하는 나사 다섯 개를 풀어주십시오.

1.3mm 십자 #000 나사 한 개

1.5mm 십자 #000 나사 한 개

1.2mm Y000 나사 세 개

브래킷을 분리하십시오.

가장자리에 클립되어 있는 작은 브래킷을 잃어버리지 않도록 주의하십시오. 작은 클립으로 고정되어 있으며 큰 브래킷에서 실수로 쉽게 빠질 수 있습니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.