주요 콘텐츠로 건너뛰기

iPhone XR Earpiece and Front Sensor Assembly Replacement/이어피스와 전면 센서 어셈블리 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

4 단계
iPhone XR Earpiece and Front Sensor Assembly Replacement, Pry up the microphone: 0 단계, 이미지 3개 중 1개 iPhone XR Earpiece and Front Sensor Assembly Replacement, Pry up the microphone: 0 단계, 이미지 3개 중 2개 iPhone XR Earpiece and Front Sensor Assembly Replacement, Pry up the microphone: 0 단계, 이미지 3개 중 3개
Pry up the microphone
  • Carefully slide the flat edge of a spudger underneath the flex cable below the microphone.

  • Twist gently to separate the microphone, while being careful not to strain or damage the flex cable.

  • If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel. If the microphone remains difficult to separate, apply more heat.

마이크 아래의 플렉스 케이블 밑으로 spudger/스퍼저의 평평한 가장자리를 조심스럽게 밀어주십시오.

플렉스 케이블을 압박하거나 손상하지 않도록 주의하며 스퍼저를 조심히 비틀어 주십시오.

필요한 경우 spudger/스퍼저의 뾰족한 끝을 사용하여 전면 패널 노치로 부터 마이크 분리를 완료하십시오. 마이크 분리가 어려운 경우 더 많은 열을 가하여 주십시오.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.