주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
프랑스어
3 단계
Repeat the same process as in Step 6 to  release the flat ribbon cable from the black rectangular latch Unscrew the six black 3.0 mm Phillips #00 screws that hold the black motherboard on. Release the clip at the bottom left corner of the black motherboard by pinching the wings at either side of the clip.
  • Repeat the same process as in Step 6 to release the flat ribbon cable from the black rectangular latch

  • Unscrew the six black 3.0 mm Phillips #00 screws that hold the black motherboard on.

  • Release the clip at the bottom left corner of the black motherboard by pinching the wings at either side of the clip.

  • Be sure that the transparent case or the black motherboard are being held or resting on a surface so that neither falls when the clip is released.

Répétez le même processus qu'à l'étape 6 pour libérer le câble plat du loquet rectangulaire noir

Dévissez les six vis noires Phillips # 00 de 3,0 mm qui maintiennent la carte mère noire.

Relâchez le clip dans le coin inférieur gauche de la carte mère noire en pinçant les ailes de chaque côté du clip.

Assurez-vous que le boîtier transparent ou la carte mère noire sont maintenus ou reposent sur une surface de sorte qu'aucun des deux ne tombe lorsque le clip est relâché.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.