주요 콘텐츠로 건너뛰기
영어
이탈리아어
3 단계
CAUTION: Do not yank the casing apart!!! Gently pry from the bottom and work a finger along the side and until monitor pops in half. The speaker cabling is soldered to the main board and the speaker is stuck in the front casing with adhesive.
  • CAUTION: Do not yank the casing apart!!!

  • Gently pry from the bottom and work a finger along the side and until monitor pops in half.

  • The speaker cabling is soldered to the main board and the speaker is stuck in the front casing with adhesive.

  • Lay the two halves as shown.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.