내 작업대

기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다

Disassembling Asus Transformer Pad TF300

안내서로 돌아가기

영어

한국어

이전 단계 다음 단계

7 단계 번역중

7 단계

Disassembling Asus Transformer Pad TF300: 0 단계, 이미지 2개 중 1개

Disassembling Asus Transformer Pad TF300: 0 단계, 이미지 2개 중 2개

Pic 1 - PCBs removed. Screen assembly and frame only.
The screen is only held on with some adhesive so (CAREFULLY) pry them apart. Using a heat gun to loosen the adhesive is HIGHLY recommended to avoid cracking the LCD while separating. The adhesive runs around the entire LCD frame. It's the adhesive that holds the LCD to the digitizer, not the metal frame. Try not to pry against the screen.
Pic 2 - Screen assembly only.
Carefully peel silver tape off of black tape.
Starting at the right (in the picture) peel up the black tape. Be careful! The power ribbon cable for the backlight is hidden under at the left side. See next step for location of connection.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.