주요 콘텐츠로 건너뛰기

5 단계 번역 중

5 단계
Tap the center pins of the rivets so they are flush with the rivet body. Use #10 x 1/2" Stainless Steel Screws to affix the plate to the mounting bracket. You can see slight indentations where the screws are to go.  I drilled pilot holes first. Don't use the "standard" license plate hardware that is 3/4" long.  Those screws appear to be long enough to hit the bumper when inserted.
  • Tap the center pins of the rivets so they are flush with the rivet body.

  • Use #10 x 1/2" Stainless Steel Screws to affix the plate to the mounting bracket. You can see slight indentations where the screws are to go. I drilled pilot holes first.

  • Don't use the "standard" license plate hardware that is 3/4" long. Those screws appear to be long enough to hit the bumper when inserted.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.