주요 콘텐츠로 건너뛰기

2 단계 번역 중

2 단계
Use a pair of tweezers and grasp the black plastic portion of the headphone jack cable.
  • Use a pair of tweezers and grasp the black plastic portion of the headphone jack cable.

  • Slowly pull out the cable. If it's hard to pull, wiggle it slightly side-to-side while pulling it.

  • Plugging the new headphone jack into place will require some force. Make sure not to break the connector while performing this procedure. Grasp the black plastic portion of the cable and wiggle it into the logic board connector.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.