주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 42개에 영향을 미칩니다.

20 단계 번역 중

20 단계
Slide the lower left pick to the lower left corner to cut the adhesive on that corner. Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad. There are quite a few things to avoid beneath the lower bezel, so study the third image closely:
  • Slide the lower left pick to the lower left corner to cut the adhesive on that corner.

  • Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.

  • There are quite a few things to avoid beneath the lower bezel, so study the third image closely:

  • Antennas

  • Home button cavity

  • Digitizer cable

  • The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

Schieb das linke untere Plektrum um die untere linke Ecke und schneide so den Kleber auf.

Lasse das Plektrum auf der Ecke stehen. Trenne nicht weiter auf und entferne nicht das Plektrum.

Du musst unter der unteren Blende einige Dinge vermeiden. Sieh dir also das dritte Bild genau an:

Antennen

Die Vertiefung für den Home Button

Das Kabel des Digitizers

Die folgenden Schritte zeigen dir, wie und wo du arbeiten musst, um Schäden an den genannten Bauteilen zu vermeiden. Erwärme nur und hebele nur dort, wo angegeben.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.