주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 9개에 영향을 미칩니다.

1 단계 번역 중

1 단계
The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended.
  • The camera bracket is attached to the front panel by adhesive. The use of an iOpener to soften the adhesive is highly recommended.

  • Follow the iOpener heating instructions described in the iOpener heating section at the beginning of this guide.

  • Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least two minutes before reheating the iOpener.

  • Place the iOpener over the front facing camera on the front edge of the top of the display.

Der Kamerahalter ist mit Kleber am Front Panel angebracht. Die Benutzung eines iOpener, um den Kleber zu aufzuweichen, ist dringend empfohlen.

Lege den iOpener für eine Minute auf höchster Stufe in die Mikrowelle.

Sei vorsichtig, dass du iOpener während des Reparaturvorgangs nicht überhitzt. Wir empfehlen mindestens zwei Minuten vor der Wiedererwärmung des iOpeners zu warten.

Platziere den iOpener auf der Frontkamera oben auf der Vorderseite des Displays.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.