주요 콘텐츠로 건너뛰기
영어
스페인어

iPad Pro 10.5" Home Button reemplazo

안내서 전제 조건

모든 선행 작업 안내서의 번역이 끝나야 이 번역이 완료된 것으로 간주됩니다.

Procedimiento de apertura del iPad Pro de 10.5 "

안내서 정보

= 완료 = 미완료
    Use this guide to replace a defective home button or to transfer the home button in the 10.5” iPad Pro onto a new display assembly.
    '''Replacing the home button will not restore Touch ID function. The Touch ID fingerprint scanner in the home button is paired to the iPad's logic board.''' In order to maintain Touch ID functionality, if you replace the screen, you must carefully transfer your original home button to the new display assembly.
    You’ll need '''replacement adhesive''' to reattach components when reassembling the device.
    '''Warning: the battery isolation method in this guide is outdated, and may result in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.'''
      Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''To reassemble your device, follow this guide in reverse order.'''
      '''To reassemble your device, follow this guide in reverse order.'''
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before you install it.
      [[E-Waste|Take your e-waste to an R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/iPad%20Pro%2010.5%22|Answers community] for troubleshooting help.

      작업중인 해당 device의 특정 부분 또는 부품을 설명하여 주십시오. 예: 배터리

      제목을 작성합니다.

      이 간략한 요약은 검색 결과에서만 볼 수 있습니다.

      독자가 안내서를 파고들기 전에 배경 정보를 알려주십시오.

      안내서 단계

      1 단계

      Usa tu iOpener o secador de pelo durante aproximadamente un minuto para calentar el área del botón de inicio a fin de ablandar el adhesivo que asegura los componentes del botón de inicio.

      2 단계

      Usa un par de pinzas para despegar cualquier cinta que cubra el conector ZIF sobre el botón de inicio.

      3 단계

      Usa un par de pinzas para sacar el cable flexible del botón de inicio directamente del conector ZIF.

      4 단계

      Levanta suavemente el soporte del botón de inicio insertando el gancho de un spudger de alabarda o el borde plano de un spudger normal debajo del soporte y haz palanca suavemente hacia el borde inferior del iPad.

      5 단계

      Levanta el soporte del botón de inicio comenzando por el lado izquierdo.

      6 단계

      Usa la punta de su dedo para presionar el botón de inicio y empújalo suavemente desde la parte frontal de la pantalla.

      귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.