주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

영어
프랑스어

1 단계 번역 중

1 단계
Peel up and remove the large rectangular battery board cover, on the edge of the logic board nearest the battery. If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.
  • Peel up and remove the large rectangular battery board cover, on the edge of the logic board nearest the battery.

  • If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.

  • If the cover doesn't seat securely during reassembly, try rotating it 180 degrees. It must be oriented correctly in order for the adhesive pads underneath to contact the board screws.

Décollez et retirez le grand rectangle qui sert de cache de la puce de la batterie et se trouve dans le coin de la carte mère le plus proche de la batterie.

Si le cache ne se décolle pas facilement, faites-le légèrement chauffer avec un iOpener, un sèche-cheveux ou un pistolet à air chaud pour faire ramollir l'adhésif en dessous. Puis réessayez.

Si vous n'arrivez pas à positionner correctement le cache lors du remontage, essayez de le faire tourner de 180 degrés. Il faut le poser correctement pour que les adhésifs touchent les vis de la carte mère.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.