주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

2 단계
Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case. This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener,  heat gun, or hair dryer. The display panel is fragile. If you plan to re-use your display, take care to insert your tool only as far as necessary to separate the adhesive. Inserting the tool any further can damage the OLED panel under the glass.
  • Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case.

  • This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener, heat gun, or hair dryer.

  • The display panel is fragile. If you plan to re-use your display, take care to insert your tool only as far as necessary to separate the adhesive. Inserting the tool any further can damage the OLED panel under the glass.

吸盤カップをしっかりと一定の圧力で引き上げて、フロントパネルとリアケースの間に開口ピックを差し込みます。

この作業には、かなりの力と忍耐力が必要です。作業が困難な場合は、吸盤カップを左右に揺らして、スクリーンの接着剤を弱めます。もしくはiOpener、ヒートガンやドライヤーで接着剤を温めてください。

ディスプレイパネルは脆いです。ディスプレイを再利用する予定の方は、ツールを必要以上に奥まで差し込まないでください。ツールを深くまで入れてしまうと、ガラス下のOLEDパネルにダメージを与えてしまうことがあります。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.