주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 38개에 영향을 미칩니다.

2 단계
The LCD is still connected to the rest of the iPad by two wide strips of adhesive tape that run up from the inside of the rear case to the front bottom LCD frame. While holding the LCD with one hand, insert the flat end of a spudger between the LCD and tape on the iPad's right side. Slide the spudger outward, separating the tape, while gently lifting up on the LCD to pull it away from the tape.
  • The LCD is still connected to the rest of the iPad by two wide strips of adhesive tape that run up from the inside of the rear case to the front bottom LCD frame.

  • While holding the LCD with one hand, insert the flat end of a spudger between the LCD and tape on the iPad's right side.

  • Slide the spudger outward, separating the tape, while gently lifting up on the LCD to pull it away from the tape.

  • It may help to twist the spudger, to spread the gap the rest of the way and separate the LCD from the tape.

LCD此时仍通过下方的两条宽胶带与后壳连接。

一只手握住LCD,将撬棒插入左侧的胶带和LCD之间。

向外滑动撬棒,分离胶带。 将LCD小心向外提起,使其远离胶带。

在分离LCD与胶带的时候,扭动撬棒会更加高效的分离。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.