주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

5 단계
Pull the wide tape toward the top of the iPad, applying constant force to release it from the antenna cable between it and the speaker. Slide the tip of a spudger through the gap between the wide tape and the antenna cable, to break the adhesive connecting the two. Continue pulling the wide tape until it is no longer covering the antenna cable.
  • Pull the wide tape toward the top of the iPad, applying constant force to release it from the antenna cable between it and the speaker.

  • Slide the tip of a spudger through the gap between the wide tape and the antenna cable, to break the adhesive connecting the two.

  • Continue pulling the wide tape until it is no longer covering the antenna cable.

Ziehe das breite Klebeband in Richtung Oberkante des iPads. Ziehe dabei gleichmäßig, so dass es sich vom Antennenkabel zwischen ihm und dem Lautsprecher ablöst.

Schiebe die Spudgerspitze durch die Lücke zwischen dem breiten Band und dem Antennenkabel, um die Klebeverbindung zwischen den beiden aufzutrennen.

Ziehe solange weiter am breiten Band, bis es das Antennenkabel nicht mehr bedeckt.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.