주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
프랑스어
5 단계
Pull the wide tape toward the top of the iPad, applying constant force to release it from the antenna cable between it and the speaker. Slide the tip of a spudger through the gap between the wide tape and the antenna cable, to break the adhesive connecting the two. Continue pulling the wide tape until it is no longer covering the antenna cable.
  • Pull the wide tape toward the top of the iPad, applying constant force to release it from the antenna cable between it and the speaker.

  • Slide the tip of a spudger through the gap between the wide tape and the antenna cable, to break the adhesive connecting the two.

  • Continue pulling the wide tape until it is no longer covering the antenna cable.

Tirez la la large bande adhésive vers le haut de l'iPad en appliquant une force constante, pour la décoller du câble d'antenne qui se trouve entre elle et le haut-parleur.

Faites glisser la pointe d'un spudger le long de l'espace entre la large bande adhésive et le câble d'antenne, pour faire céder l'adhésif qui les relie.

Continuez à décoller la large bande adhésive jusqu'à ce qu'elle ne couvre plus le câble d'antenne.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.