주요 콘텐츠로 건너뛰기
영어
스페인어
6 단계
Remove the backing from the adhesive on the extra rubber foot provided in the plastic bag with the screws. With the backing removed, place the sticky side of the rubber foot down over the screws you just inserted, and apply pressure to it for 30 seconds. With the backing removed, place the sticky side of the rubber foot down over the screws you just inserted, and apply pressure to it for 30 seconds.
  • Remove the backing from the adhesive on the extra rubber foot provided in the plastic bag with the screws.

  • With the backing removed, place the sticky side of the rubber foot down over the screws you just inserted, and apply pressure to it for 30 seconds.

Retire la cubierta del adhesivo en el pie de goma adicional provisto en la bolsa de plástico con los tornillos.

Con la cubierta retirada, coloque el lado adhesivo del pie de goma hacia abajo sobre los tornillos que acaba de insertar y aplique presión sobre él durante 30 segundos.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.