주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
스페인어

27 단계 번역 중

27 단계
The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly. There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.
  • The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly.

  • There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.

  • Lifting from the left side, remove the logic board.

El ensamblaje de la placa lógica tiene un espacio muy justo, pero puedes facilitar la extracción insertando un spudger debajo del borde izquierdo y levantándolo ligeramente.

No debe haber resistencia al retirar la placa lógica. Revisa todos los cables con cuidado y manténgalos fuera del camino si es necesario para que no se enganchen en el tablero.

Levantando desde el lado izquierdo, remueva la placa lógica.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.