주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

27 단계 번역 중

27 단계
The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly. There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.
  • The logic board assembly is a tight fit, but you can make it easier to remove by inserting a spudger under the left edge and levering it up slightly.

  • There should be no resistance as you remove the logic board. Check all cables carefully and hold them out of the way if needed so they don't snag on the board.

  • Lifting from the left side, remove the logic board.

ロジックボードアセンブリはタイトに装着されています。左側端にスパッジャーを挿入してわずかにテコで持ち上げると、より簡単に取り出せます。

ロジックボードを取り外す際には、抵抗がないはずです。全てのケーブルを詳細に点検して、作業の邪魔にならないように避けておきます。ボードに引っ掛けてしまう心配がありません。

左側から持ち上げて、ロジックボードを取り出します。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.