주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

17 단계 번역 중

17 단계
Use a spudger to disconnect the left-side Thunderbolt flex cable by prying it straight up from the logic board. Pry from the inside edge, nearest the fan. Gently push the flex cable connector off to the side so it doesn't interfere with logic board removal.
  • Use a spudger to disconnect the left-side Thunderbolt flex cable by prying it straight up from the logic board.

  • Pry from the inside edge, nearest the fan.

  • Gently push the flex cable connector off to the side so it doesn't interfere with logic board removal.

Trenne das linke Thunderbolt-Flexkabel mit einem Spudger, indem du es gerade vom Logic Board abhebelst.

Heble von der Innenkante her, die dem Lüfter am nächsten ist.

Schiebe den Stecker des Flexkabels vorsichtig zur Seite, damit es beim Entfernen des Logic Boards nicht im Weg ist.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.