주요 콘텐츠로 건너뛰기
영어
프랑스어

1 단계 번역 중

1 단계
Operating on your device while it is on, or plugged in may result in electrical shock.  Make sure the device is not powered before continuing. Remove the thirteen 6mm screws using a Phillips #0 screwdriver. Gently pry the back plate off using the plastic opening tool, leveraging the groove along the device's hinge.
  • Operating on your device while it is on, or plugged in may result in electrical shock. Make sure the device is not powered before continuing.

  • Remove the thirteen 6mm screws using a Phillips #0 screwdriver.

  • Gently pry the back plate off using the plastic opening tool, leveraging the groove along the device's hinge.

Utiliser votre appareil allumé ou branché peut provoquer un choc électrique. Assurez-vous que l'appareil n'est pas sous tension avant de continuer.

Retirez les treize vis de 6 mm à l’aide d’un tournevis cruciforme n ° 0.

Soulever délicatement la plaque arrière à l'aide de l'outil d'ouverture en plastique, en tirant parti de la rainure située le long de la charnière de l'appareil.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.