주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
프랑스어
2 단계
Carefully peel the battery warning label off the upper case between the battery and the optical drive to reveal an additional Tri-point screw.
  • Carefully peel the battery warning label off the upper case between the battery and the optical drive to reveal an additional Tri-point screw.

  • Remove the last 7.5 mm ( 7.2 mm ) Tri-point screw securing the battery to the upper case.

  • Do not remove the label from the battery.

Décollez soigneusement l'autocollant d'avertissement du boîtier supérieur entre la batterie et le lecteur optique, ce qui révèlera une vis tri-wing supplémentaire.

Dévissez la dernière vis tri-wing de 7,5 mm (7,2 mm) fixant la batterie au boîtier supérieur.

N'enlevez pas l'autocollant de la batterie.

-[* black] Carefully peel the battery warning label off the upper case between the battery and the optical drive to reveal an additional Tri-wing screw.
-[* red] Remove the last 7.5 mm ( 7.2 mm ) Tri-wing screw securing the battery to the upper case.
+[* black] Carefully peel the battery warning label off the upper case between the battery and the optical drive to reveal an additional Tri-point screw.
+[* red] Remove the last 7.5 mm ( 7.2 mm ) Tri-point screw securing the battery to the upper case.
[* icon_caution] Do not remove the label from the battery.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.