주요 콘텐츠로 건너뛰기
4 단계
Slide an opening pick back and forth across the bottom edge of the phone in the gap you created to cut the adhesive holding the screen in place. If you plan to re-use this screen, be careful not to insert your opening pick more than 3 mm here to avoid damaging the LCD under the glass. If you plan to re-use this screen, be careful not to insert your opening pick more than 3 mm here to avoid damaging the LCD under the glass.
  • Slide an opening pick back and forth across the bottom edge of the phone in the gap you created to cut the adhesive holding the screen in place.

  • If you plan to re-use this screen, be careful not to insert your opening pick more than 3 mm here to avoid damaging the LCD under the glass.

Schiebe ein Plektrum an der Unterkante im eben geöffneten Spalt hin und her, damit die Klebeverbindung des Displays aufgetrennt wird.

Wenn du das Display wieder verwenden willst, dann darfst du das Plektrum hier nicht tiefer als 3 mm einsetzen, damit das LCD unter der Glasscheibe nicht beschädigt wird.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.