주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 16개에 영향을 미칩니다.

32 단계 번역 중

32 단계
Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end. Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.
  • Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

  • Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.

  • Be gentle and keep an eye on the LCD cables as you flip the display over.

  • Lay the LCD on the front panel glass to allow access to the display cables.

Versuche nicht das LCD ganz zu entfernen. Es ist immer noch über verschiedene Kabel am Ende mit dem Home Button mit dem iPad verbunden. Hebe es nur am Ende mit der Frontkamera an.

Klappe das LCD wie die Seite eines Buches auf, wobei du an der Kameraseite hochhebst und es über das Home Button Ende des Rückgehäuses klappst.

Sei dabei sehr vorsichtig und achte auf die LCD Kabel.

Lege das LCD auf das Glas des Front Panels, um so an die Displaykabel zu gelangen.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.