주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

영어
스페인어
2 단계
Remove the following four Phillips screws: One 1.9 mm screw One 4.3 mm screw
  • Remove the following four Phillips screws:

  • One 1.9 mm screw

  • One 4.3 mm screw

  • Two 4.3 mm screws with thinner shanks

  • Remove the tiny grounding clip from the left screw hole. Be careful not to lose it.

  • The grounding clip installs such that the contoured edge faces the left side of the phone.

  • Remove the small plastic insert from the right side of the USB-C port.

  • Be sure to reinstall this insert before you screw down the daughterboard.

Remueve los siguientes cuatro tornillos Phillips:

Un tornillo de 1.9 mm

Tres tornillos de 4.3 mm

Retira el pequeño clip de conexión a tierra del orificio del tornillo izquierdo. Ten cuidado de no perderlo.

El clip de conexión a tierra se instala de tal manera que el borde contorneado mira hacia el lado izquierdo del teléfono.

Retira el pequeño inserto de plástico del lado derecho del puerto USB-C.

[* black] Remove the following four Phillips screws:
[* red] One 1.9 mm screw
[* orange] ThreeOne 4.3 mm screw
[* yellow] Two
4.3 mm screws with thinner shanks
[* orange] ThreeOne 4.3 mm screw
[* yellow] Two
4.3 mm screws with thinner shanks
[* black] Remove the tiny grounding clip from the left screw hole. Be careful not to lose it.
[* icon_reminder] The grounding clip installs such that the contoured edge faces the left side of the phone.
[* black] Remove the small plastic insert from the right side of the USB-C port.
[* icon_caution] Be sure to reinstall this insert before you screw down the daughterboard.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.