주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 4개에 영향을 미칩니다.

영어
프랑스어
2 단계
Remove the following four Phillips screws: One 1.9 mm screw One 4.3 mm screw
  • Remove the following four Phillips screws:

  • One 1.9 mm screw

  • One 4.3 mm screw

  • Two 4.3 mm screws with thinner shanks

  • Remove the tiny grounding clip from the left screw hole. Be careful not to lose it.

  • The grounding clip installs such that the contoured edge faces the left side of the phone.

  • Remove the small plastic insert from the right side of the USB-C port.

  • Be sure to reinstall this insert before you screw down the daughterboard.

Dévissez les quatre vis cruciformes suivantes :

Une vis de 1,9 mm

Trois vis de 4,3 mm

Ôtez le petit clip de mise à terre qui se trouve dans le trou de vis à gauche. Faites attention à ne pas le perdre.

Remontez le clip de façon que le profil soit orienté vers la gauche du téléphone.

Enlevez le petit insert en plastique à droite du port USB-C.

[* black] Remove the following four Phillips screws:
[* red] One 1.9 mm screw
[* orange] ThreeOne 4.3 mm screw
[* yellow] Two
4.3 mm screws with thinner shanks
[* orange] ThreeOne 4.3 mm screw
[* yellow] Two
4.3 mm screws with thinner shanks
[* black] Remove the tiny grounding clip from the left screw hole. Be careful not to lose it.
[* icon_reminder] The grounding clip installs such that the contoured edge faces the left side of the phone.
[* black] Remove the small plastic insert from the right side of the USB-C port.
[* icon_caution] Be sure to reinstall this insert before you screw down the daughterboard.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.