물건을 수리하세요 커뮤니티 상점

Huawei Mate 10 Display austauschen

안내서로 돌아가기
영어
독일어
3 단계
Huawei Mate 10 Screen Replacement, Disconnect the fingerprint sensor cable: 0 단계, 이미지 3개 중 1개 Huawei Mate 10 Screen Replacement, Disconnect the fingerprint sensor cable: 0 단계, 이미지 3개 중 2개 Huawei Mate 10 Screen Replacement, Disconnect the fingerprint sensor cable: 0 단계, 이미지 3개 중 3개
Disconnect the fingerprint sensor cable

  • Use tweezers to peel the tape covering the fingerprint sensor cable connector near the bottom edge of the phone.

  • The cable is held in place with a ZIF socket.

  • Use the point of a spudger to flip up the gray bar on the socket to unlock the cable.

Kabel zum Fingerabdrucksensor ablösen

Ziehe mit einer Pinzette das Klebeband vom Stecker des Kabels zum Fingerabdrucksensor nahe an der Unterkante des Smartphones ab.

Das Kabel ist in einem ZIF-Anschluss befestigt.

Klappe den grauen Sicherungsbügel am Anschluss mit der Spudgerspitze hoch, damit das Kabel frei wird.

[title] Disconnect the fingerprint sensor cable
-[* black] Use tweezers to peel the tape covering the fingerprint sensor cable connector near the bottom edge of the phone.
+[* black] Use [product|IF145-020|tweezers] to peel the tape covering the fingerprint sensor cable connector near the bottom edge of the phone.
[* icon_note] The cable is held in place with a ZIF socket.
[* black] Use the point of a spudger to flip up the gray bar on the socket to unlock the cable.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.