주요 콘텐츠로 건너뛰기

Remplacement de l'antenne Wi-Fi du PSP 300x

영어
프랑스어
6 단계
PSP 300x  WI-FI Antenna Replacement/Removal, LCD Ribbon Cables: 0 단계, 이미지 3개 중 1개 PSP 300x  WI-FI Antenna Replacement/Removal, LCD Ribbon Cables: 0 단계, 이미지 3개 중 2개 PSP 300x  WI-FI Antenna Replacement/Removal, LCD Ribbon Cables: 0 단계, 이미지 3개 중 3개
LCD Ribbon Cables
  • Using a spudger or fingernail, flip the small black/brown locks on the four ribbon cable connectors up.

  • Ensure you DO NOT lift the white part on the connector.

  • Pull all four ribbon cables out, and remove the LCD screen and homebar from the PSP.

  • Be careful removing the two small ribbons from the LCD connector, they are very delicate.

À l'aide d'une spatule ou d'un ongle, retournez les petits verrous noirs / bruns des quatre connecteurs de câble ruban.

Assurez-vous de NE PAS soulever la partie blanche du connecteur.

Retirez les quatre câbles plats et retirez l'écran LCD et la barre d'accueil de la PSP.

Attention à retirer les deux petits rubans du connecteur LCD, ils sont très délicats.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.